2016年8月30日星期二

Puli PL-M02 Motorcycle Lift — Get Your Motorcycle Ready to Ride!

If you own a motorbike and you like to do your own maintenance … or you want to be able to keep it looking great…. you need the Puli PL-M02 Motorcycle Lift!

The Puli PL-M02 Motorcycle Lift is a 1,102 lb capacity, electro hydraulic, easy-to-use lift for motorcycles, snowmobiles, ATVs, jet skis and other small recreational vehicles.

The extra-large platform has a 47″ working height and a removable rear wheel access plate for easy access. This lift comes with a secure wheel vise.  Moving this lift around your garage is effortless with trouble-free wheels to get it moving.

    1,102 lb. lifting capacity
    Removable steel ramp
    Removable rear wheel access plate
    Extra-large platform 47″ working height

For those who want to do more service work on their motorcycle, Puli has a Motorcycle Tire Changer and a Motorcycle Wheel Balancer to make it easy. You can get everything you need in the Puli--www.chinapuli.com.

2016年8月22日星期一

Tire Changers: Breaking it Down

At the top of the list, with oil changes and brakes, changing and repairing tires is one of the most common jobs at your local repair shop. A good tire changer will, with regular maintenance and some repairs, last for many years.

Times are a changing in the tire-changing world! The days of easy steel rims and regular valve stems are fast disappearing. These days there are “soft” aluminum rims, tires with stiff sidewalls and TPMS (tire pressure monitoring system) valve stems that, if serviced improperly, can break.  Keep this in mind when shopping for a new tire changer.

When you’re in the market for a tire changer, it’s hard to differentiate between all of the different brands out there, each company trying to put their best foot forward in a bid to win over your trust and loyalty. Each brand then has a variety of tire changer models, fashioned to meet the needs of specific niches. Here’s how you can easily select the right changer for you from Puli Equipment.

Size Matters! What type and size of wheels do you want to work on?

The size of the wheel: Before you shop for a tire changer, you need to know what size tires you will be changing. Look at the rim diameter of the tires to be changed; 20 to 24 inch diameter is the common measurement of most wheels. If you want to go smaller, like motorcycles …. Or larger, like truck tires … that will determine if a different changer is needed.

The type of wheel: Light trucks will utilize a different tire changer from heavy-duty trucks. There are also shops that specialize in run flat tires or low profile wheels. Such tires require special tire changers because the ordinary models may not be able to handle too well.

The style tire shop that you are: Do you do a lot of tires? Are you just getting started? Do you want to be able to work on specialty tires or large truck-tires? The tire changer you choose will determine the style of shop you are.

With these factors in mind, we now need to look at the different types of tire changers available from Puli. Each style has been designed for specific needs. Now that you know what type of tires you want to work on, here is how to easily find the one that fits.

http://www.chinapuli.com/Tyre-Changer/

2016年8月18日星期四

Notice: upgrade Balancers from 32 cog raster to 64/128cog raster



From October to December of 2016, we will upgrade Wheel Balancer for much higher precision.

Below are the details:

1.Upgrade Complete shaft 32 cog raster to 64 cog raster
Balancers model shown in below:

PL-1150,PL-1152,PL-1100,PL-1120,PL-1800,PL-1820,PL-1821,PL-1823, PL-1828, PL-1829,PL-1897

2.Upgrade Complete shaft 32 cog raster to 128 cog raster

Balancers model shown in below:

PL-6570,PL-6572,PL-6573,PL-6574,PL-65729WR,PL-6575WR,PL-6579WR,PL-6881, PL-6882, PL-6883,PL-6883WR, PL-6828,PL-6885WR

3.As well, we will also upgrade the computer board of the balancers.
The new computer board will be common to all models as 32/64/128cog raster balancers.

For the customers’ first new balancers order after upgrade, we will send 1pc new computer board per 10 balancers for future continuous service after sales.

Note:The current old 32cog raster computer board cannot be used to 64/128cog raster balancers. 

 The new computer board will be in black color, and which can be used to all the balancers as 32/64/128 cog raster.

If you looking for wheel balancer, pls feel free to browse our website http://www.chinapuli.com/Wheel_Balancer/

2016年8月16日星期二

Scissor Lift Safety Notes

Large platform profile scissor lift instruction & safety notes

General precautions
The operator and the maintenance fitter are required to observe the prescriptions of safety regulation in force in the country of installation of the lift.

Furthermore, the operator and maintenance fitter must:
-Always work in the stations specified and illustrated in this manual;
-Never remove or deactivate the guards and mechanical, electrical, or other types of safety devices;
-Read the safety notices placed on the machine and the safety information in this manual.

In the manual all safety notices are shown as follows:
Warning: indicates following operations that are unsafe and can cause minor injury to persons and damage the lift, the vehicle or other property.

Risk of electric shock: a specific safety notice placed on the lift in areas where the risk of electric shock is particularly high.

Risk and protection devices
For optimal personal safety and safety of vehicles, observe the following regulations:

-Do not enter the safety and safety of vehicles is being lifted.
-Be sure to lift only approved vehicles, never exceed the specified carrying capacity, maximum height, and projection (vehicle length and width);
-Make sure that there is no person on the platforms during up and down movements and during standing

General risks for lifting or descent

The following safety equipments are used to protect over loading or the possibility of engine failure.

In the condition of over loading, the over-falling valve will open and directly return oil to the oil tank.

Each bottom of oil cylinder is equipped with antiknock and locked valve(optional). When the oil pipe is burst in the circuit of hydraulic pressure, the relevant antiknock and locked valve will work and limit the speediness of platform.

Safety tooth and gear module are parts which guarantee the safety of personnel beneath the machine in failure condition of other protections.

So make sure the integrity of gear module and that the safety tooth has occluded completely.

There is nothing abnormal should be left on the safety modules to prevent safety gear from occlude normally.

Risk for extrusion

During up and down operations, personnel leave the said area without following the rule and instruction.

During up and down operations, no person is admitted to work beneath the movable parts of the lift, should work in the safe zone.

Risk of impact

Before the operator begins up and down movements, make sure that there are no personnel inside the danger zone. When, due to operational reasons, the lift is stopped at relatively low elevations (lower than 1.75m above the ground) personnel must be careful to avoid impact with parts of the machine not marked with special colors.

Risk of falling (vehicle)

This hazard may arise in the case of incorrect positioning of the vehicle on the platforms, overweight of the vehicle, or in the case of vehicles of dimensions that are not compatible with the capacity of the lift.

When the platform is being tested, the vehicle engine can not be turned on.
There is nothing should be placed on the lift-lowering area and the movable parts of the lift.

Risk of slipping

The floor caused by lubricant contamination of around the lift. The area beneath and immediately surrounding the lift and also the platforms must be kept clean. Remove any oil spills immediately.

Risk of electric shock

Risk of electric shock in areas of insulated and shattered electric equipments
Do not use jets of water, steam solvents or paint next to the lift, and take special care to keep such substances clear of the electrical control panel.

Risks related to appropriate lighting

The operator and the maintenance fitter must be able to assure that all the areas of the lift are properly and uniformly illuminate compliance with the laws in force in the place of installation.

During up and down operations, the operator should continually observe the lift and can operate it only in the position of operator. When lifting and lowering the vehicle, the cushion needs being put in the bottom of chassis.

The handling of safety devices is strictly forbidden. Never exceed the maximum carrying capacity of the lift, make sure the vehicles to be lifted have no load.

It is therefore essential to adhere scrupulously to all regulations regarding use, maintenance and safety contained in this manual.

High quality scissor lifts are on promotion now, detailed product information, pls refer to our website http://www.chinapuli.com/Lift/Scissor-Lift/.

2016年8月15日星期一

PL-1120 Wheel Balancer Operation Video

PL-1120 Wheel Balancer Operation Video
https://youtu.be/s5RUVjZSbdU

For more details of PL-1120 wheel balancer, pls click http://www.chinapuli.com/Middle-Class-Wheel-Balancer/PL-1120-Wheel-Balancer.html

2016年8月3日星期三

High Quality Four Post lifts

Being the nation's leading 4 post lift manufacturers--PULI. We also offer our value priced line of 4 post lifts exclusively from Auto Lift. Our four post lifts range in lifting capacity from 7,716 lbs. - 11,023 lbs. Check out our catalog!







For details on our four post lifts, please visit our 4 post lifts page.
http://chinapuli.com/Four-Post-Lift/