Car Lift Maintenance: Check it Every Day

I met a gentleman the other day that was 96 years young! He was surprisingly
agile and swift on his feet. He had few wrinkles and looked really good for his
age! I was really impressed and thought he wasn’t a day past 70. That got me to
thinking about ‘maintenance’.  If I exercise, take care of myself, eat right
and stress less…. Will that help me to age just as gracefully?

There are Puli car lifts out there that have been doing their job for decades and
still run like the day they were installed. They have aged well, with the right
maintenance and care.  Do you know how to maintain your lift so it will run like
new for many years? Luckily, it’s easier to know how to help your lift age well
…. my wrinkles, not so much!

Perhaps the most important car lift maintenance is to adjust the cables.  Over
time, the cables stretch and if not adjusted, a cable can jump a pulley or cause
the lift to rise unevenly.  Each cable should have about .5” of deflection
(should not move more than .5”).  This is true for a two-post or four-post lift.
 Adjustments are very simple to do and the steps are specific in the manual
provided with your lift. Please look that over for instructions on how to adjust
your cables.

Next is lubrication on your lift. Chain rollers, cable pulleys, safety latches
and carriage tracks inside the towers.  We recommend white lithium grease.  You
should do this weekly.

A simple walk around your car lift for a safety check is easy, yet rarely done.
Make sure there is nothing in the tracks or carriage (shop rags, tools,
cardboard, etc.) that may cause the machine to bind up.  Run the lift up and down
without a load and ensure the safety features are in working order.

In addition to regular in-house inspections, the standard requires that all
vehicle lifts be inspected at least annually by a “qualified lift inspector.” A
lift inspection is a thorough evaluation of the operating mechanism(s), safety
system(s), maintenance, structural integrity and field modifications of a
particular lift in order to identify any risks which may affect the ability of
that lift to operate in a safe and reliable manner.

– Lift cables normally require replacement every four to five years.
– Lift cables should be replaced if you see three or more broken wires in one
strand.
– Replace the cables if you see: corrosion or rusting on the wires or ends,
kinking, crushed
areas, cutting, spreading, a cable core protruding, or any other abnormality.
– If any cable defects are found the lift should be shut down immediately until
the defective
cable(s) have been replaced.
– Cables and other lift parts should be kept free of corrosive agents, solvents,
and road
salt. If such agents are spilled or splashed on any lift component, immediately
rinse and
wipe down with a clean rag.
– Spray cables every three months with Penetrating Oil and wipe down. Failure to
keep
cables free of corrosive agents will lead to reduced service life, cable failure,
etc. which
could result in property damage and/or personal injury.

Every. Single. DAY.
– Give the lift a quick once-over before using it. Check for any obvious leaks
or defects.
Inspect cables, hoses and chains for any sign of wear.
– Verify lift is operating properly, rising smoothly and levelly and all locking
mechanisms for
the arms and carriages are working.

Every. Single. WEEK.
– Lubricate all chain rollers and cable pulleys. Grease the carriage tracks
inside the towers.
– Check all nuts and bolts; tighten where necessary.
– After the first week, check cable tension and adjust as necessary. Check every
6 months
after.

Every. Single. MONTH.
– Check and lubricate all safety mechanisms; ensure they are in proper working
order.
Replace any worn or defective parts.
– Check and tighten anchor bolts as necessary.
– Inspect all moving parts; replace any worn or defective parts.
 
professional automotive repair car lifts manufacturer: www.chinapuli.com