| From October to December of 2016, we will upgrade Wheel Balancer for much higher precision. Below are the details: 1.Upgrade Complete shaft 32 cog raster to 64 cog raster Balancers model shown in below: PL-1150,PL-1152,PL-1100,PL-1120,PL-1800,PL-1820,PL-1821,PL-1823, PL-1828, PL-1829,PL-1897 2.Upgrade Complete shaft 32 cog raster to 128 cog raster Balancers model shown in below: PL-6570,PL-6572，PL-6573,PL-6574,PL-65729WR,PL-6575WR,PL-6579WR，PL-6881, PL-6882, PL-6883,PL-6883WR, PL-6828,PL-6885WR 3.As well, we will also upgrade the computer board of the balancers. The new computer board will be common to all models as 32/64/128cog raster balancers. For the customers’ first new balancers order after upgrade, we will send 1pc new computer board per 10 balancers for future continuous service after sales. Note：The current old 32cog raster computer board cannot be used to 64/128cog raster balancers. The new computer board will be in black color, and which can be used to all the balancers as 32/64/128 cog raster. If you looking for wheel balancer, pls feel free to browse our website http://www.chinapuli.com/Wheel_Balancer/ |
2016年8月18日星期四
Notice: upgrade Balancers from 32 cog raster to 64/128cog raster
2016年8月16日星期二
Scissor Lift Safety Notes
Large platform profile scissor lift instruction & safety notes
General precautions
The operator and the maintenance fitter are required to observe the prescriptions of safety regulation in force in the country of installation of the lift.
Furthermore, the operator and maintenance fitter must:
-Always work in the stations specified and illustrated in this manual;
-Never remove or deactivate the guards and mechanical, electrical, or other types of safety devices;
-Read the safety notices placed on the machine and the safety information in this manual.
In the manual all safety notices are shown as follows:
Warning: indicates following operations that are unsafe and can cause minor injury to persons and damage the lift, the vehicle or other property.
Risk of electric shock: a specific safety notice placed on the lift in areas where the risk of electric shock is particularly high.
Risk and protection devices
For optimal personal safety and safety of vehicles, observe the following regulations:
-Do not enter the safety and safety of vehicles is being lifted.
-Be sure to lift only approved vehicles, never exceed the specified carrying capacity, maximum height, and projection (vehicle length and width);
-Make sure that there is no person on the platforms during up and down movements and during standing
General risks for lifting or descent
The following safety equipments are used to protect over loading or the possibility of engine failure.
In the condition of over loading, the over-falling valve will open and directly return oil to the oil tank.
Each bottom of oil cylinder is equipped with antiknock and locked valve(optional). When the oil pipe is burst in the circuit of hydraulic pressure, the relevant antiknock and locked valve will work and limit the speediness of platform.
Safety tooth and gear module are parts which guarantee the safety of personnel beneath the machine in failure condition of other protections.
So make sure the integrity of gear module and that the safety tooth has occluded completely.
There is nothing abnormal should be left on the safety modules to prevent safety gear from occlude normally.
Risk for extrusion
During up and down operations, personnel leave the said area without following the rule and instruction.
During up and down operations, no person is admitted to work beneath the movable parts of the lift, should work in the safe zone.
Risk of impact
Before the operator begins up and down movements, make sure that there are no personnel inside the danger zone. When, due to operational reasons, the lift is stopped at relatively low elevations (lower than 1.75m above the ground) personnel must be careful to avoid impact with parts of the machine not marked with special colors.
Risk of falling (vehicle)
This hazard may arise in the case of incorrect positioning of the vehicle on the platforms, overweight of the vehicle, or in the case of vehicles of dimensions that are not compatible with the capacity of the lift.
When the platform is being tested, the vehicle engine can not be turned on.
There is nothing should be placed on the lift-lowering area and the movable parts of the lift.
Risk of slipping
The floor caused by lubricant contamination of around the lift. The area beneath and immediately surrounding the lift and also the platforms must be kept clean. Remove any oil spills immediately.
Risk of electric shock
Risk of electric shock in areas of insulated and shattered electric equipments
Do not use jets of water, steam solvents or paint next to the lift, and take special care to keep such substances clear of the electrical control panel.
Risks related to appropriate lighting
The operator and the maintenance fitter must be able to assure that all the areas of the lift are properly and uniformly illuminate compliance with the laws in force in the place of installation.
During up and down operations, the operator should continually observe the lift and can operate it only in the position of operator. When lifting and lowering the vehicle, the cushion needs being put in the bottom of chassis.
The handling of safety devices is strictly forbidden. Never exceed the maximum carrying capacity of the lift, make sure the vehicles to be lifted have no load.
It is therefore essential to adhere scrupulously to all regulations regarding use, maintenance and safety contained in this manual.
High quality scissor lifts are on promotion now, detailed product information, pls refer to our website http://www.chinapuli.com/Lift/Scissor-Lift/.
General precautions
The operator and the maintenance fitter are required to observe the prescriptions of safety regulation in force in the country of installation of the lift.
Furthermore, the operator and maintenance fitter must:
-Always work in the stations specified and illustrated in this manual;
-Never remove or deactivate the guards and mechanical, electrical, or other types of safety devices;
-Read the safety notices placed on the machine and the safety information in this manual.
In the manual all safety notices are shown as follows:
Warning: indicates following operations that are unsafe and can cause minor injury to persons and damage the lift, the vehicle or other property.
Risk of electric shock: a specific safety notice placed on the lift in areas where the risk of electric shock is particularly high.
Risk and protection devices
For optimal personal safety and safety of vehicles, observe the following regulations:
-Do not enter the safety and safety of vehicles is being lifted.
-Be sure to lift only approved vehicles, never exceed the specified carrying capacity, maximum height, and projection (vehicle length and width);
-Make sure that there is no person on the platforms during up and down movements and during standing
General risks for lifting or descent
The following safety equipments are used to protect over loading or the possibility of engine failure.
In the condition of over loading, the over-falling valve will open and directly return oil to the oil tank.
Each bottom of oil cylinder is equipped with antiknock and locked valve(optional). When the oil pipe is burst in the circuit of hydraulic pressure, the relevant antiknock and locked valve will work and limit the speediness of platform.
Safety tooth and gear module are parts which guarantee the safety of personnel beneath the machine in failure condition of other protections.
So make sure the integrity of gear module and that the safety tooth has occluded completely.
There is nothing abnormal should be left on the safety modules to prevent safety gear from occlude normally.
Risk for extrusion
During up and down operations, personnel leave the said area without following the rule and instruction.
During up and down operations, no person is admitted to work beneath the movable parts of the lift, should work in the safe zone.
Risk of impact
Before the operator begins up and down movements, make sure that there are no personnel inside the danger zone. When, due to operational reasons, the lift is stopped at relatively low elevations (lower than 1.75m above the ground) personnel must be careful to avoid impact with parts of the machine not marked with special colors.
Risk of falling (vehicle)
This hazard may arise in the case of incorrect positioning of the vehicle on the platforms, overweight of the vehicle, or in the case of vehicles of dimensions that are not compatible with the capacity of the lift.
When the platform is being tested, the vehicle engine can not be turned on.
There is nothing should be placed on the lift-lowering area and the movable parts of the lift.
Risk of slipping
The floor caused by lubricant contamination of around the lift. The area beneath and immediately surrounding the lift and also the platforms must be kept clean. Remove any oil spills immediately.
Risk of electric shock
Risk of electric shock in areas of insulated and shattered electric equipments
Do not use jets of water, steam solvents or paint next to the lift, and take special care to keep such substances clear of the electrical control panel.
Risks related to appropriate lighting
The operator and the maintenance fitter must be able to assure that all the areas of the lift are properly and uniformly illuminate compliance with the laws in force in the place of installation.
During up and down operations, the operator should continually observe the lift and can operate it only in the position of operator. When lifting and lowering the vehicle, the cushion needs being put in the bottom of chassis.
The handling of safety devices is strictly forbidden. Never exceed the maximum carrying capacity of the lift, make sure the vehicles to be lifted have no load.
It is therefore essential to adhere scrupulously to all regulations regarding use, maintenance and safety contained in this manual.
High quality scissor lifts are on promotion now, detailed product information, pls refer to our website http://www.chinapuli.com/Lift/Scissor-Lift/.
2016年8月15日星期一
PL-1120 Wheel Balancer Operation Video
PL-1120 Wheel Balancer Operation Video
https://youtu.be/s5RUVjZSbdU
For more details of PL-1120 wheel balancer, pls click http://www.chinapuli.com/Middle-Class-Wheel-Balancer/PL-1120-Wheel-Balancer.html
https://youtu.be/s5RUVjZSbdU
For more details of PL-1120 wheel balancer, pls click http://www.chinapuli.com/Middle-Class-Wheel-Balancer/PL-1120-Wheel-Balancer.html
2016年8月11日星期四
PL-2960 Truck Tire Changer Operation Video
| PL-2960 Truck Tire Changer Operation Video https://youtu.be/Gg08w9-WHjo |
2016年8月3日星期三
High Quality Four Post lifts
Being the nation's leading 4 post lift manufacturers--PULI. We also offer our value priced line of 4 post lifts exclusively from Auto Lift. Our four post lifts range in lifting capacity from 7,716 lbs. - 11,023 lbs. Check out our catalog!
For details on our four post lifts, please visit our 4 post lifts page.
http://chinapuli.com/Four-Post-Lift/
For details on our four post lifts, please visit our 4 post lifts page.
http://chinapuli.com/Four-Post-Lift/
2016年7月28日星期四
Scissor Lift for Wheel Alignment Introduction
Scissor Lift for Wheel Alignment Introduction
http://chinapuli.com/Lift/Scissor-Lift/PL-D35B-Scissor-Lift.html
http://chinapuli.com/Lift/Scissor-Lift/PL-D35B-Scissor-Lift.html
2016年7月25日星期一
Two Post Lift
Below are some of the two post lifts we carry at GUANGZHOU JINGJIA AUTO
EQUIPMENT. Check out the items below or browse the site (www.chinapuli.com) for
any other automotive equipment you might need!
PL-3.5-2B Two Post Lift
The PL-3.5-2B is with floor plate. It's the perfect choice for those customers
who demand the 3500kg lifting capacity at the lowest possible price. The
minimum height of the lifting pad of PL-3.5-2B is 110mm, easily lift and
suitable for low profile cars and SUV.
PL-4.0-2B Two Post Lift
The PL-4.0-2B is the upgrade version of the PL-3.5-2B two post above ground
lift. The PL-4.0-2B lifting capacity is 4000kg, 500 kg bigger than PL-3.5-2B.
The PL-4.0-2B is a commercial grade two post lift and is the perfect choice for
those commercial garages or homeowner who demands the high quality at the
absolute best price. The PL-4.0-2B is a TRUE 8,840 lb. capacity 2 post lift
that offers a great value to the customer.
EQUIPMENT. Check out the items below or browse the site (www.chinapuli.com) for
any other automotive equipment you might need!
PL-3.5-2B Two Post Lift
The PL-3.5-2B is with floor plate. It's the perfect choice for those customers
who demand the 3500kg lifting capacity at the lowest possible price. The
minimum height of the lifting pad of PL-3.5-2B is 110mm, easily lift and
suitable for low profile cars and SUV.
PL-4.0-2B Two Post Lift
The PL-4.0-2B is the upgrade version of the PL-3.5-2B two post above ground
lift. The PL-4.0-2B lifting capacity is 4000kg, 500 kg bigger than PL-3.5-2B.
The PL-4.0-2B is a commercial grade two post lift and is the perfect choice for
those commercial garages or homeowner who demands the high quality at the
absolute best price. The PL-4.0-2B is a TRUE 8,840 lb. capacity 2 post lift
that offers a great value to the customer.
订阅：
博文 (Atom)