Balanced tires are vital to safe driving. When the
tires are out of balance, they place stress on the shocks, bearings and
other parts of the wheel assembly. You should normally let an expert
balance your tires, as improper tire alignment
can cause considerable damage. If you know cars, however, and have
the basic equipment, you can balance tires in just a few steps.
1 Remove any previous wheel weights which may be present on the wheel.
They complicate the issue and make it harder to balance the tire. You
can do it, but it entails a bit of a hassle.
2 Place the tire and wheel on the balancer by inserting the shaft
through the wheel hub and securing it in place. Make sure the wheel is
as centered as possible on the balancer, though it doesn't need to be
exact.
3 Spin the wheel gently in the tire balancer.
You will notice the heaviest part of the wheel being drawn to the
bottom and the lightest part to the top. Allow it to settle in that
position, then mark the lightest part on the tire with a piece of
chalk. Repeat the process to make sure you've marked the correct spot.
4 Attach the wheel weights, adhesive side first to the part of the
wheel just below the spot on the tire you just marked. This should
counter the imbalance in the tire.
5 Move the wheel so that the weighted part is in the 3 o'clock
position. Release the wheel. If it rolls clockwise so that the
weighted position is on the bottom, you've added too much weight. If
it rolls back up to the top, then you haven't added enough.
6 Continue adding or subtracting wheel weights from the marked
location until you have attained the right balance. The weights should
remain in the 3 o'clock position naturally, without spinning either
up or down.
7 Secure the wheel weights to the wheel a little
further by using duct tape or similar adhesives. The adherent used in
wheel weights is not usually very strong and can use some help in
staying where it is supposed to.
8 Remount the wheel to the car, taking care that the lug nuts are secure.
Tag: wheel balancing, car wheel balancer, Tire Balance Machines
2015年6月30日星期二
2015年6月10日星期三
U579 Wheel Balancer
U579 Wheel Balancer
1. High precision main shaft ensures repeated measuring accuracy;
2. Equipped with high intelligent chipset, microcomputer chip, and high stable data automatic display function. With self-calibration and self-diagnosis functions;
3. 17”LCD monitor, 3D animation interface.
Intelligent LCD screen with dynamic message displaying makes all balancing mode operation visualized.
Innovative dynamic indication light can make sure the accuracy and convenience of balancing operation
4. Deluxe design. Bigger machine cabinet with thicker material.
5. Advanced and automatic wheel width measurement function, data automatic measurement function, and automatic memory function of measured data
6. 10 Balancing modes and OPT function.
Extended measuring scale can measure rims from10” to 24”.
Patented quick clamping measuring head for accurate weights sticking
7. Tracking sticking balancing mode can locate weights precisely and rapidly, and avoid adjusting position repeatedly.
Especially be used to balance the new type high class wheel which only be balanced with sticking weights
8. Intelligent error self-test function makes sure the correct use and convenient operations
9. Automatic distance and wheel diameter measuring
10. With split and weight concealing function
11. Equipped with protection hood, plier, full sets of cones and caliper
12. Standard automatic braking system after the balancing, much easier
13. High accuracy for the balancer, guarantee high quality service
14. Easy and safety operation
15. Optional brake pedal for accurate positioning of counter weights
16. Optional larger cone and spacing ring, machine can balance rim with big central bore such as that of Toyota coaster, Transit, Iveco etc.
17. Optional universal flange adaptor, machine can balance French cars’ tires such as that of Citroen
http://www.unitequipment.com/U579-Wheel-Balancer.html
- passenger car wheel balancer, truck wheel balancer, car wheel balancer, on car wheel balancer,car wheel balancing,on car wheel balancer,car wheel balance,car wheel balancer
1. High precision main shaft ensures repeated measuring accuracy;
2. Equipped with high intelligent chipset, microcomputer chip, and high stable data automatic display function. With self-calibration and self-diagnosis functions;
3. 17”LCD monitor, 3D animation interface.
Intelligent LCD screen with dynamic message displaying makes all balancing mode operation visualized.
Innovative dynamic indication light can make sure the accuracy and convenience of balancing operation
4. Deluxe design. Bigger machine cabinet with thicker material.
5. Advanced and automatic wheel width measurement function, data automatic measurement function, and automatic memory function of measured data
6. 10 Balancing modes and OPT function.
Extended measuring scale can measure rims from10” to 24”.
Patented quick clamping measuring head for accurate weights sticking
7. Tracking sticking balancing mode can locate weights precisely and rapidly, and avoid adjusting position repeatedly.
Especially be used to balance the new type high class wheel which only be balanced with sticking weights
8. Intelligent error self-test function makes sure the correct use and convenient operations
9. Automatic distance and wheel diameter measuring
10. With split and weight concealing function
11. Equipped with protection hood, plier, full sets of cones and caliper
12. Standard automatic braking system after the balancing, much easier
13. High accuracy for the balancer, guarantee high quality service
14. Easy and safety operation
15. Optional brake pedal for accurate positioning of counter weights
16. Optional larger cone and spacing ring, machine can balance rim with big central bore such as that of Toyota coaster, Transit, Iveco etc.
17. Optional universal flange adaptor, machine can balance French cars’ tires such as that of Citroen
http://www.unitequipment.com/U579-Wheel-Balancer.html
订阅：
博文 (Atom)