Nitrogen Generator To The Tyre Inflation Has Proved Useful

 1. Nitrogen tyre inflation improve the stability and comfort of the tire traveling

Almost inert nitrogen diatomic gases, chemical properties extremely lively, the gas molecules are larger than oxygen molecules, difficult to thermal expansion and contraction amplitude of deformation is small, its permeation speed of the tire wall is slower than that of air, about 30 to 40 percent can be maintained stabilize the tire pressure, tire driving stability, ensure driving comfort; nitrogen audio conductivity is low, is equivalent to 1/5 of the ordinary air, using nitrogen can effectively reduce the tire noise and improve quietness traveling.

2. Prevent puncture and lack of air grind line

Puncture is the number one killer in road traffic accidents, according to statistics, 46% of accidents are caused by tire failure on the highway, a flat tire one accounted for 70% of the total tire accident. Driving the car, the tire temperature rise due to friction with the ground, especially at high speeds and the emergency brake, the gas temperature in the tire will increase rapidly, tire pressure surge, so there will be the possibility of puncture. The high temperatures cause tire rubber aging, fatigue strength decreased, severe tread wear, and may puncture the important factors. Compared with general high pressure air, high purity nitrogen as anaerobic and almost free of water does not contain oil, and its low coefficient of thermal expansion, low thermal conductivity, the temperature was raised slowly, and reduces tire heat accumulating speed, non-contingent nor Assistant contingent characteristics, it is possible to greatly reduce the chance of puncture.

3. Extend tire life

Using nitrogen gas, the the tire pressure stable volume change is small, and greatly reduces the possibility of irregular tire friction, such as crown grinding tread shoulder wear, partial wear, and to improve the life of the tire; aging of rubber is subject to the oxygen molecules in the air oxidation due to the decline in its strength and elasticity, aging and there will be cracking phenomenon, this time caused by one of the reasons for the shortened life of the tire. Nitrogen separation device can greatly limit to exclude the air of oxygen, sulfur, oil, water and other impurities, effectively reducing the degree of oxidation of the inner liner layer of the tire and rubber corrosion phenomenon, does not corrode metal rim, extending tire life, but also greatly reduces the status of the rim rust.

4. Reduce fuel consumption and protect the environmental

Lack of tire pressure and heated scroll the increased negative force, will result in increased fuel consumption when the car is traveling; nitrogen can maintain stable tire pressure, delaying the tire pressure to reduce outside, its dry and not oil-free water, thermal conductivity low, heating up the slow characteristics, to reduce the increase in temperature in the tire when walking, as well as small deformation grip improve and reduce the rolling resistance, so as to achieve the purpose of reducing fuel consumption. The relevant U.S. authorities tires with sufficient nitrogen and charge air contrast experiments, the statistical results show that in the experiment than air-filled tire filled with nitrogen gas to run more than 26% of the mileage. Nitrogen tire inflation, tire pressure design can achieve fuel consumption indicators in automotive design. Experimental results show that nitrogen tire 2-10% more fuel efficient than the air-filled tires. Effective in reducing air pollution. The Brazilians practice, nitrogen gas tire traveling fifty thousand kilometers still do not need qi. Nitrogen tire more resistant to wear, than the pneumatic tire is not reached on the damaged tire tread loss index, nitrogen filling the tire to run an average mileage, 48% more than the air-filled tires.

nitrogen generator http://www.chinapuli.com/Nitrogen-Generator-Inflator-Machine/

Step-by-Step Guide to Checking Tire Inflation

Checking tire inflation takes only seconds and should be done often. The tire's Pounds per Square Inch (PSI) number is located on the sidewall for easy reference, and maintaining that level will require a tool to measure pressure. This tool can be bought, or used as part of a gas station's air pump.

N2 Gas Stations

    Nearly every gas station has an air pump, and many of them be fed coins, usually quarters, to be used. This option is ideal because not only can you check the air pressure, but refill the tires at the same time. Simply remove the cap from the tire's valve stem and attach the air pump. A ruler will slide out and display air pressure.

Pencil and Digital Tire Gauges

    Pressure gauges are relatively easy to buy. Digital gauges will cost slightly more, but will give you a more accurate PSI reading. Pencil gauges work like the air pumps at gas stations, as a ruler will slide out to the appropriate PSI number. Both gauges use the same process. Unscrew the valve stem cap and attach the gauge. Electronic gauges will have to be turned on first, and the battery will need routine checking.

Nitrogen  Tire Inflators

    Tire inflaters, like those manufactured by Slime, also will give you a PSI reading. Like an air pump at a gas station, you also can re-inflate a tire while checking the reading. Like the above two options, the tire inflater must be attached to a tire's valve stem. Since inflaters can be small and portable, they can be kept in the trunk for roadside emergencies.

Tag：Coats Nitrogen generator for sale, heavy duty tyre inflator,  Nitrogen generator,  Nitrogen Generator Machine

http://www.chinapuli.com/Nitrogen-Generator-Inflator-Machine/